BOLISS Drafting Tall Office Chair vs BOLISS Mid-Back Mesh Drafting Chair: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are comparing the boliss drafting tall office chair vs 400lbs mid back mesh options from the same brand. Both chairs share a 400 lbs weight capacity and mesh upholstery for airflow. The main difference lies in their back support and adjustability. One offers a high back with a 3D headrest and flip-up arms. The other provides a mid-back design with built-in lumbar support and height-adjustable arms. Your choice depends on whether you need extra height and neck support or a simpler, more compact frame.
Key differences
| Aspect | BOLISS Drafting Tall Office Chair | BOLISS Mid-Back Mesh Drafting Chair |
|---|---|---|
| Back Style | High Back | Mid-Back |
| Headrest | 3D adjustable | not listed |
| Lumbar Support | Freely adjustable cushion | Built-in |
| Armrests | 90-degree flip-up | Height adjustable |
| Seat Cushion Thickness | 5 inches | 4 inches |
| Overall Height | 52.8 inches | 41.1 inches |
Which one should you choose?
Choose BOLISS Drafting Tall Office Chair if
- You need a chair that reaches higher standing desks or bars.
- You want a headrest to support your neck during long shifts.
- You prefer armrests that flip up to slide completely under a desk.
Choose BOLISS Mid-Back Mesh Drafting Chair if
- You are seated at a standard height adjustable desk.
- You want a lighter chair that is easier to move around.
- You prefer height-adjustable armrests over flip-up mechanisms.
Verdict: The high-back model suits users who need extended reach and neck support for taller workspaces. The mid-back version is better for standard desk heights and those who prefer a lighter, more compact frame. Both offer durable mesh and strong load capacity for daily use.
Specs: Tall vs Mid-Back Drafting
Back support style
Product A features a high back design with a 3D adjustable headrest. This setup cradles your neck and supports your entire spine during long shifts. Product B offers a mid-back style with built-in lumbar support. It lacks a headrest, which may leave your upper back unsupported if you are taller. The high back on Product A provides more comprehensive spinal relief for users who need full coverage. Product B’s mid-back is lighter but offers less vertical support for taller frames.
Seat cushion thickness
Product A uses a 5-inch thick molded sponge seat cushion. This extra thickness provides substantial cushioning that retains its shape over years of heavy use. Product B features a 4-inch thick molded foam seat. While still comfortable, the thinner profile may offer less pressure relief for heavier users or those sitting for extended periods. The 5-inch cushion on Product A delivers a firmer, more durable orthopedic support compared to the standard 4-inch foam in Product B.
Armrest functionality
Product A includes padded armrests that flip up 90 degrees. This space-saving feature allows you to push the chair completely under a desk to save floor space. Product B has height-adjustable armrests but does not mention a flip-up mechanism. If you need to tuck the chair away to maximize room size, Product A’s flip-up arms are more practical. Product B’s height adjustment is useful for customizing arm position, but it cannot be stored flat against the backrest.
Height adjustability range
Product A has an extended hydraulic height adjustment range from 24.8 inches to 32.1 inches. This makes it ideal for standing desks, draft tables, or kitchen islands. Product B adjusts from 23.6 inches to 30.9 inches. While both fit standard desks, Product A reaches higher, making it better suited for tall workstations. If you use a high counter or bar-height desk, Product A provides a better fit. Product B is more suited for standard office desk heights.
Foot ring design
Both chairs include a foot ring to reduce thigh pressure and improve circulation during long sitting sessions. Product A features an oversized chrome foot ring, which offers a larger surface area for your feet. Product B includes a standard foot ring but does not specify the material or size. The oversized chrome ring on Product A may provide more stability and comfort for users with larger feet. Both designs help alleviate leg fatigue, but Product A’s ring appears more robust.
Choose your BOLISS drafting chair
Users needing neck and lumbar support
Product A includes a 3D adjustable headrest and a freely adjustable lumbar cushion. This combination targets spinal relief for long shifts. The high back design cradles your neck while the lumbar support protects your lower waist. You get comprehensive ergonomic coverage that Product B lacks due to its mid-back style and built-in lumbar only.
People with small apartments or tight spaces
Product A features 90-degree flip-up armrests. You can fold them up to push the chair completely under the desk. This saves up to one square meter of floor space. Product B has height-adjustable arms that do not fold away. If you need to maximize indoor space in a small apartment or tight cubicle, Product A is the better choice.
Those wanting a lighter chair for mobility
Product B weighs 41.2 pounds, which is lighter than Product A at 46.2 pounds. This makes Product B easier to move around your workspace. Both chairs have smooth-rolling casters, but the reduced weight of Product B might be preferable if you frequently reposition your seating. The mid-back design also keeps the overall profile lower and less bulky.
The products compared
BOLISS Drafting Tall Office Chair
Best for: Heavy users needing tall seating for standing desks
- Upholstery Material
- High-density nylon mesh
- Lumbar Support
- Freely adjustable cushion
- Armrest Adjustability
- 90-degree flip-up
- Weight Capacity
- 400 lbs
- Headrest Type
- 3D adjustable
- Seat Cushion Type
- Molded foam
View on Amazon: BOLISS Drafting Tall Office Chair Affiliate link
This BOLISS high-back drafting chair supports up to 400 pounds and offers an extended 7.3-inch height range from 24.8 to 32.1 inches. It features a 3D adjustable headrest, freely adjustable lumbar support, and 90-degree flip-up arms for compact storage. The breathable mesh back and thick molded foam seat provide all-season comfort. It suits users needing tall seating for standing desks or bars.
Pros
- 400 lbs weight capacity
- 7.3-inch hydraulic height adjustment range
- 90-degree flip-up armrests
- 3D adjustable headrest
- Freely adjustable lumbar cushion
Cons
- Seat cushion is molded sponge, not full mesh
- Armrests flip up only, no height adjustment listed
- No mention of tilt tension control mechanism
Good fit if
- You need a chair taller than 30 inches for a standing desk
- You weigh up to 400 pounds and need heavy-duty support
- You want to tuck the chair under a desk to save space
Skip if
- You require a fully breathable mesh seat for maximum airflow
- You need armrests that adjust up and down independently
- You prefer a mid-back design for lower profile storage
Verdict: BOLISS Drafting Tall Office Chair 400lbs fits users who need a sturdy, tall seat for high workstations. Its flip-up arms and 400 lb capacity make it a practical option for heavy users with space constraints.
BOLISS Mid-Back Mesh Drafting Chair
Best for: Tall users needing high weight capacity
- Upholstery Material
- Mesh
- Lumbar Support
- Built-in
- Armrest Adjustability
- Height adjustable
- Weight Capacity
- 400 lbs
- Seat Cushion Type
- Molded foam
- Features
- Lumbar Support, Adjustable Arms
View on Amazon: BOLISS Mid-Back Mesh Drafting Chair Affiliate link
This BOLISS drafting chair features a mid-back mesh design with a 400-pound weight capacity. It includes a built-in lumbar support system and height-adjustable armrests. The seat uses thick molded foam for comfort during long sessions. A foot ring helps reduce leg pressure. The chair fits high-standing desks with its extended seat height range.
Pros
- 400 lbs weight capacity
- Built-in lumbar support
- Adjustable height foot ring
- Height-adjustable armrests
- Thick molded foam seat
Cons
- Mid-back style offers less upper back coverage
- Armrests adjust only in height
- Seat depth is not adjustable
Good fit if
- You need a chair for a high standing desk
- You prefer mesh upholstery for breathability
- You want a foot ring for leg support
Skip if
- You require a high-back design for full spine support
- You need 4D armrests with depth or pivot adjustments
- You are taller than 6 feet and need extended lumbar reach
Verdict: BOLISS Mid-Back Mesh Drafting Chair suits users who prioritize a high weight limit and breathable mesh for tall desk setups, though it lacks the upper back coverage of a high-back model.
Specifications side by side
| Spec | BOLISS Drafting Tall Office Chair | BOLISS Mid-Back Mesh Drafting Chair |
|---|---|---|
| Upholstery Material | High-density nylon mesh | Mesh |
| Lumbar Support | Freely adjustable cushion | Built-in |
| Armrest Adjustability | 90-degree flip-up | Height adjustable |
| Weight Capacity | 400 lbs | 400 lbs |
| Headrest Type | 3D adjustable | not stated |
| Seat Cushion Type | Molded foam | Molded foam |
| Features | Headrest | Lumbar Support, Adjustable Arms |
| Back Style | High Back | Mid-Back |
| Material | not stated | Mesh |
| Color | Black | Grey |
| Dimensions | 27.6 × 27.3 × 52.8 inches | 19.9 × 26.7 × 41.1 inches |
| Weight | 46.2 pounds | 41.2 pounds |
| Size | BLS-2818HD | 19.9D x 26.7W x 41.1H Inch |
| Model | 2818HD | 20100D |
Frequently asked questions
Which BOLISS drafting chair is better for tall users?
The BOLISS Drafting Tall Office Chair is the better choice for tall users. It reaches a height of 52.8 inches, which accommodates higher standing desks. The other model tops out at 41.1 inches, making it suitable for standard desk heights. If you need extra legroom and clearance, the taller option provides the necessary vertical space for comfort.
Does the BOLISS Drafting Tall Office Chair have adjustable arms?
Yes, this chair features flip-up arms. This design allows you to slide the chair completely under your desk when not in use. It saves floor space in tight work areas. The arms provide support when needed but do not obstruct your movement or desk access. This practical feature is ideal for users who value flexibility in their workspace setup.
What is the weight capacity for both BOLISS drafting chairs?
Both chairs support a maximum weight capacity of 400 lbs. This high limit ensures stability for heavier users during long working sessions. The sturdy construction helps maintain balance and safety. You can rely on the frame to hold your weight without wobbling. This specification makes both models suitable for users who prioritize durability and load-bearing strength in their seating.
Is the BOLISS Mid-Back Mesh Drafting Chair breathable?
Yes, the mid-back model uses mesh upholstery for breathability. This material allows air to circulate through the backrest, reducing heat buildup. It is a practical choice for users who work in warm environments or prefer cooler seating. The mesh design helps keep you comfortable during extended periods of sitting. This feature distinguishes it from solid upholstery options that may trap heat.
Which chair has a higher backrest?
The BOLISS Drafting Tall Office Chair features a high back design. It provides full support for your upper back and neck. The other model offers a mid-back style, which covers only the lower spine. If you need support for your shoulders and head, the high-back option is the superior choice. The extended coverage helps maintain proper posture throughout your workday.
How much floor space do these chairs take up?
The tall chair measures 27.3 inches in width and 27.6 inches in length. The mid-back model is slightly narrower at 26.7 inches wide and 19.9 inches deep. Both chairs fit standard desk footprints. The mid-back version has a smaller footprint, which may suit smaller rooms. Consider your available floor space when choosing between the two models.