Furmax Mid-Back Mesh Office Chair Review: Specs, Pros and Cons

What stands out

• Dual lumbar supports on the backrest for waist comfort
• High-density elastic sponge cushion with breathable mesh upholstery
• Reclines up to 130 degrees with adjustable tension
• SGS-certified gas lift supports up to 240 pounds
• Smooth PU casters for quiet 360-degree movement

Who it fits

Key Specs Explained

Weight Capacity: 240 lbs

This rating indicates the maximum safe load the chair can hold. You can sit comfortably without risking damage to the gas lift or base. It suits users up to that limit. If you are heavier, look for a higher rating. This capacity covers most average-sized adults for daily office or gaming tasks.

Upholstery Material: Mesh

The backrest uses a breathable mesh fabric. This material allows air to flow through, keeping your back cool during long sessions. It prevents heat buildup compared to solid foam or leather. You will stay drier and more comfortable. This feature is ideal for warm rooms or users who tend to get hot while working.

Seat Cushion Type: High-density elastic sponge

The seat uses thick, resilient foam for support. It maintains its shape over time instead of flattening out quickly. You get consistent comfort for hours of sitting. This density offers better durability than standard soft foam. It provides a firm yet yielding surface that supports your weight effectively during extended work or play periods.

Safety Certifications: SGS, BIMIFA

These marks confirm the chair meets specific safety and stability standards. SGS certifies the gas lift quality. BIMIFA verifies the base strength. You can trust the construction is tested for safety. This reduces the risk of mechanical failure. These certifications provide assurance that the chair is built to handle regular use without compromising structural integrity.

Design and Build Quality

The listing describes a black mesh back with a high-density elastic sponge cushion. A solid wood layer sits inside the seat for stability. This three-layer structure aims to keep the seat firm over time. The mesh surface offers breathability, which helps you stay cool during long work sessions. Dual lumbar supports are built into the backrest. They sit against your lower back to reduce strain when you lean forward. The chair weighs 20.5 pounds, making it light enough to move around your home office or bedroom. Its compact footprint fits well in smaller spaces without taking up too much room. You get a 19.7-inch wide seat that pairs with desks between 28 and 30 inches tall. The seat height adjusts four inches, from 16.5 to 20.5 inches. This range lets you find a comfortable working position for most standard desks. Smooth casters allow 360-degree rotation. They use PU material that should not scratch your floor. You can tilt the backrest up to 130 degrees. Loosen the tension knob under the seat to rock back freely. Tighten it to lock your preferred angle. This setup lets you shift between upright work and relaxed leaning. The chair includes SGS and BIMIFA certifications. These marks indicate the gas lift and base meet specific safety standards. You can trust the structure to hold up to 240 pounds safely. The design focuses on practical comfort rather than flashy aesthetics. It suits remote workers or students who need a reliable spot for computer work. The materials chosen prioritize durability and airflow. You get a straightforward, functional piece of furniture that fits into various settings. The black color blends easily with most decor styles. You do not need to worry about matching it to bright office colors. It remains a neutral, professional choice for any workspace.

Setup And Daily Use Guide

Assembly requires careful attention to the listed sequence. You must attach the armrests and backrest first, leaving screws loose initially. After securing the seat cushion and backrest in their final positions, you tighten all hardware. This method ensures proper alignment and structural integrity before final fastening. The chair measures 18.9 inches high by 19.7 inches wide at the backrest, with a seat depth of 19.7 inches. Armrests extend 13 inches, providing adequate support for forearm placement during computer work. Seat height adjusts between 16.5 and 20.5 inches, a four-inch range that accommodates desks from 28 to 30 inches tall. This flexibility allows you to align your knees at a comfortable angle while working. Daily operation involves using the lever under the seat to raise or lower the chair. You can also tilt the backrest up to 130 degrees. Adjusting the tension knob under the seat controls the resistance of this recline motion. Tightening it locks your preferred angle, while loosening it allows free rocking. The base rotates 360 degrees on smooth PU casters, enabling quiet movement across floors without scratching. The mesh back and high-density sponge cushion work together to support extended sitting sessions. Dual lumbar supports align with your lower spine when you lean back. The SGS-certified gas lift and BIMIFA five-star base provide stability for users up to 240 pounds. This setup supports various environments, from home offices to study areas, ensuring consistent performance during long work or study periods.

Before You Buy This Chair

You should verify your desk height before purchasing. This chair adjusts from 16.5 to 20.5 inches, fitting desks between 28 and 30 inches tall. If your workspace is taller, the seat may sit too low. Check your floor type as well. The listing notes smooth PU casters that protect surfaces, but you should confirm they suit your specific flooring to avoid scratches during movement. Consider the room size. At 19.7 inches wide, it fits smaller home offices or bedrooms well. For larger workspaces, ensure it does not feel cramped. Upkeep is straightforward. Wipe the mesh with a damp cloth. Avoid harsh chemicals that might damage the breathable fabric. This model sits alongside other mid-back options in our 2026 guide. It offers a solid balance of lumbar support and breathability for standard users. If you need higher back support, look at high-back variants. This choice works best for those prioritizing airflow and a compact footprint over extended recline features.

Check before you buy

• Verify your desk height falls between 28 and 30 inches.
• Confirm your floor type is compatible with PU casters.
• Ensure your room has space for a 19.7-inch wide chair.
• Check if you need high-back support instead of mid-back.

The product at a glance

1

Furmax Mid-Back Mesh Office Chair

Best for: Standard desks needing mesh breathability

Upholstery Material

Mesh

Weight Capacity

240 lbs

Seat Cushion Type

High-density elastic sponge

Safety Certifications

SGS, BIMIFA

Features

Lumbar Support

Back Style

Mid-Back

View on Amazon: Furmax Mid-Back Mesh Office Chair Affiliate link

The Furmax 751 is a medium-sized mesh office chair with a 240-pound weight capacity. It features high-density sponge cushioning and dual lumbar supports. The seat height adjusts from 16.5 to 20.5 inches, and the backrest reclines up to 130 degrees. This chair suits users needing breathable comfort and basic ergonomic adjustments for standard desk heights.

Pros

• SGS and BIMIFA safety certifications
• 240-pound weight capacity
• 130-degree recline range
• Breathable mesh upholstery

Cons

• No armrest height adjustment
• No headrest included
• Fixed seat depth

Good fit if

• You need a breathable mesh back
• You prefer a 130-degree recline
• You sit under 240 pounds

Skip if

• You require headrest support
• You need adjustable armrests
• You weigh more than 240 pounds

Verdict: Furmax 751 Mesh Office Chair fits users who want a breathable seat with a 130-degree recline and a 240-pound capacity. It works well for standard desks but lacks adjustable armrests.

Specifications side by side

Frequently asked questions

See also

• furmax office chair alternatives
• best furmax gaming chairs under 100
• furmax ergonomic office desk chair review
• bestmassage massage chair review